KRK ROKIT 5 G2 Betriebsanweisung PDF herunterladen (Seite 11)

Positioning Your Monitors

Positioning your monitors correctly in the studio is critical to their performance. Typically,

hey should be placed so that the listening position is fully “covered” with all monitors

resting on the same horizontal plane. A great way to test a monitor for its imaging

capability is to play back a CD or DVD recorded acoustically in stereo (or one recorded in

surround sound if you have a surround sound set up). We recommend acoustic music

because it represents the spectrum of sound. You can adjust the angle of each monitor by

listening for dead spots. Keep in mind, changing the angle or position of a monitor will

change the sound.

2-Channel Set Up

Close-Field Configuration – In a control room situation, the monitors are often times

placed on the meter bridge or in a close-field listening position. Initial placement starts by

measuring out a simple equilateral triangle (all three sides equal in length) with the apex at

the center of the listening position (as shown in Figure 1) as an “overlay” for the stereo

installation. In this configuration, the Left and Right monitors are each placed at a 60°

angle, equidistant from the listening position.

60°

Listening Position

Figure 1

rokit_manual REV E_rokit_manual 2/19/13 10:24 AM Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

KRK ROKIT 5 G2 Betriebsanweisung Seite 11